TATA TISCON  

 

TATA TISCON 500 DTATA TISCON SD

Introduction

TATA Tiscon 500 D is a high strength ribbed TMT reinforcement bar. The consistency in strength across the rebar is maintained by reducing the impurities like Sulphur and Phosphorous to a level below 0.075%. '500' refers to the strength of the rebar in MPa and 'D' refers to ductility of the rebar. TATA Tiscon 500 D conforms to the latest standards (last revision 2012) set by Bureau of Indian Standards (BIS).

Specification

TATA Tiscon 500 D is manufactured through a superior quality and controlled steel making process to diminish the levels of impurities like Sulphur and Phosphorous. These impurities decrease the strength of steel in extreme hot and cold conditions. Therefore lower these values the better.

TATA Tiscon 500 D is available in sizes from 6mm to 40mm. A comparison chart on specifications of 500, 500 D and BIS standards is mentioned below –

                                  BIS Specifications for Chemical Properties
Chemical Properties
(maximum)
Fe 500
Fe 500-D
Tata TISCON 500 D 
(Typical Maximum Values)*
% Carbon
0.300
0.250
0.250
% Carbon Equivalent (CE)
0.420
0.420
0.400
% Sulphur (S)
0.055
0.040
0.035
% Phosphorus (P)
0.055
0.040
0.035
% Sulphur & Phosphorus (S&P)
0.105
0.075
0.070
% Nitrogen (PPM)
120
120
120
 
BIS Specifications for Mechanical Properties
Mechanical Properties
(minimum)
Fe 500
Fe 500-D
Tata TISCON 500 D 
(Typical Maximum Values)*
Yield Stress- YS (N/mm2)
500
500
500
Ultimate Tensile Stress- UTS (N/mm2)
545
565
600
UTS/YS Ratio
1.08
1.08
1.12
 
* As obtained in 90% of the heats

 

 

 

 

 

 D 

Section

Recommended Consumer Price (Rs.Per Piece)*

6 mm

161.00

8 mm

272.00

10 mm

412.00

12 mm

590.00

16 mm

1050.00

20 mm

1641.00

25 mm

2558.00

 

 

 

These Tata TATA TISCON 500 D Ductile Rebar prices are applicable in the state of Kerala for material
sold through the Authorised Distributor and its network, with effect from 1st January 2017.

*rates may be changed without any prior notice 

· The above prices are on cash basis and are inclusive of all taxes
· Each piece of 12 m length
· All dimensions are subject to BIS tolerances Customers should satisfy themselves, as far as the no. of   pieces are concerned, at the   time of delivery
· Free home delivery within 5kms of dealer outlet on purchase of Rebars worth Rs 30,000 and above